Splash Guard Under Car Dragging: Troubleshoot Guide to Overcome the Issue

If you’ve ever driven behind a truck or large vehicle, you know the feeling of getting splattered by rocks and debris that get kicked off the road. While this can be a nuisance, it’s not just an annoyance; it can also cause severe damage to your car. That’s where a splash guard comes in.

A splash guard, a mudguard or fender, is a protective barrier on a vehicle’s underside. Its purpose is to prevent debris from being out into the air and hitting the bottom of the car, causing damage. At the same time, splash guards are on the front and back of a vehicle. They can also locate it under the car to protect against debris from the road.

Suppose you’re experiencing issues with your splash guard dragging or falling off. In that case, it’s essential to address the problem as soon as possible. Not only can it cause further damage to your car. But it can also be a safety hazard for other drivers on the road. This troubleshooting guide will cover some common issues with splash guards and how to fix them.

Issues that could arise

Issue 1: Splash Guard is Dragging on the Ground 

One of the most common issues with splash guards is that they start to drag on the ground. Causing a loud and annoying noise while driving. A few different things can cause this:

  • The splash guard needs to be secured correctly:  If it was properly on the spot, it may not be firmly attached to the car and could start to sag or drag on the ground.
  • The splash guard is old and worn out:  Over time, splash guards can become worn out and may start to sag or drag on the ground. It is especially true if the car is driven in harsh weather conditions or on rough roads.
  • The splash guard needs to be more significant:  If it is not the correct size for your car, it may hang too low and drag on the ground.

To fix this issue, you’ll need to inspect the splash guard and determine the cause of the problem. If it’s not adequately in excellent condition, you’ll need to reattach it using the proper mounting hardware. If it’s old and worn out, you’ll need to replace it with a new splash guard. Suppose the splash guard is too big or too small; then you’ll need to purchase a unique splash guard that is the correct size for your car.

Issue 2: Splash Guard is Falling Off

If your splash guard is falling off completely, the mounting hardware has likely become loose or damaged. A few different things can cause this:

  • The mounting hardware is old:  Over time, the mounting hardware that holds the splash guard in place can become worn out and no longer support the splash guard’s weight.
  • The hardware was not appropriate for adjustments:  If it was not on perfect adjustments during installation, it might come loose over time.
  • The mounting hardware has been out of condition: If your car has already been in an accident or driven on rough roads. The mounting hardware could become damaged and unable to hold the splash guard.

To fix this issue, you’ll need to inspect the mounting hardware and determine the cause of the problem. If the hardware is old, you’ll need to replace it with new hardware. Suppose it is not on correct adjustments; then you’ll need to tighten it using a socket wrench. If the hardware has been out of condition, you’ll need to replace it with new hardware.

Issue 3: Splash Guard is Making Noise

If your splash guard is making a loud noise while driving. It is likely hitting the ground or rubbing against something else on the car. A few different things can cause this:

  • The splash guard is too big or too small:  If the splash guard is not the correct size for your car, it may be too long or too short and hit the ground or other parts of the vehicle while driving.
  • The guard needs to be in perfect adjustments: If the splash guard is adequately aligned, it may rub against the wheels or other parts of the car, causing a noise.
  • The splash guard is out of condition:  If it is damaged, it may have bent or misshapen areas that are hitting the ground or rubbing against other parts of the car.

To fix this issue, you’ll need to inspect the splash guard and determine the cause of the problem. If the splash guard is too big or too small. You’ll need to purchase a new one that is the correct size for your car. Suppose the splash guard is not correctly on position; you’ll need to realign it using a socket wrench. If the splash guard is out of condition, you’ll need to replace it with a new one.

Some Common Mistakes When Troubleshooting Splash Guard Dragging

Troubleshooting splash guard dragging can be frustrating, especially if you need clarification on what the cause of the problem is. However, people often need help fixing this issue. Let’s see the most common mistakes to avoid when troubleshooting splash guard dragging:

  • Not inspecting the splash guard thoroughly:  It’s essential to check the splash guard to determine the cause of the problem. If you don’t take the time to do this. You may end up replacing the splash guard or trying to fix the wrong problem.
  • Need to use the proper tools: If you’re trying to fix the splash guard yourself, it’s essential to have the right tools for the job. It includes a socket wrench and other tools specifically designed for working on cars. Using the wrong tools could cause further damage to the splash guard or the vehicle itself.
  • Only replace the splash guard if necessary: If the splash guard is old and worn out, or if it has damage beyond repair, it may be required to replace it with a new one. Ignoring this issue and trying to fix the old splash guard will likely result in further problems down the road.
  • Not checking for other issues: It’s essential to remember that the splash guard dragging may be a symptom of a more significant problem with the car. Before focusing solely on the splash guard, check for other issues causing the problem. Such as worn-out suspension components or damaged wheels.

By avoiding these common mistakes, you’ll be able to troubleshoot splash guard dragging more effectively and get your automobile back on the road in no time.

Learn More About Splash Guard Dragging

If you’re good at learning more about splash guard dragging and how to fix it, there are a few different resources you can turn to:

  • Online forums: Many online forums and discussion groups are there to maintain and repair the car. These can be great resources for discovering more about splash guard dragging and getting advice from other car owners who have experienced the same issue.
  • Car repair manuals:  Most car manufacturers provide repair manuals for their vehicles. Which can be an excellent resource for learning more about splash guard dragging and how to fix it. These manuals often contain detailed instructions and diagrams to help you understand the problem and find the right solution.
  • Car repair videos: Many car repair videos are available online to show you how to fix splash guard drag. These videos can be beneficial if you’re a visual learner and prefer to see the repair process in action.
  • Professional mechanic:  If you’re uncomfortable tackling the problem, you can always bring your car to a professional mechanic. They will be able to diagnose the issue and provide a solution, whether repairing or replacing the splash guard.

By taking advantage of these resources, you’ll be able to learn more about splash guard dragging and find an answer that works for you.

Conclusion

In conclusion, splash guards are essential to any car’s protection against road debris. Suppose you’re experiencing issues with your splash guard dragging, falling off, making noise, or blocking your view. In that case, it’s essential to address the problem as soon as possible to prevent further damage and ensure the safety of yourself and other drivers on the road. By taking the troubleshooting steps outlined in this guide, you should be able to fix any issues with your splash guard and get back on the road safely.

Click here to view the visual story version of this Article

Frequently Asked Questions of Splash Guard Under Car Dragging

Q: Can I fix the splash guard dragging myself?

A: In many cases, splash guard dragging can fix by a DIY enthusiast. However, if you’re not comfortable working on your car or the problem is more serious, it’s best to bring it to a professional mechanic.

Q: How much money does fixing splash guard dragging cost?

A: The cost of fixing splash guard dragging will vary depending on the problem’s severity and whether you choose to repair it yourself or bring it to a professional mechanic. If you’re improving yourself, you’ll need to factor in the cost of any tools or replacement parts that you may need. If you’re bringing it to a mechanic, you’ll need to consider the labor cost.

Similar Posts