Can Bad Alignment Cause the Traction Control Light to Come?

Introduction to the topic

Both novice and seasoned motorists may find it irritating to see the traction control warning light flash on the dashboard. Possible causes of its activation include a malfunctioning wheel sensor, a faulty steering angle sensor, or even bad weather. Etc. However, can a traction warning be triggered by a simple issue with wheel alignment?

When a car’s wheels aren’t properly aligned, it throws off the vehicle’s handling and stability. There may be an issue with the wheel alignment if the traction control light turns on and stays on for a time.

The traction control warning light may be illuminated for a variety of other reasons as well. Find out why it flashes on your dashboard and how improper wheel alignment plays a role by reading on!

Can traction control be affected by improper alignment?

Can bad alignment cause the traction control light to come on?

Yes, the error code that causes the traction control light to illuminate from the control module can be set off by improper alignment. Maintaining straight and smooth wheel motion requires a regular wheel alignment. However, tires with improper alignment need to be replaced more frequently.

The traction control warning light typically illuminates under acceleration. Don’t freak out; just concentrate on keeping your hands as steady as possible on the wheel.

Because the traction control system will no longer aid you, your caution is warranted. The safest course of action is to slow down and head to the nearest repair shop as soon as possible.

What are the causes of an unexpected traction control warning light?

Aligning the wheels is crucial for the smooth functioning of the whole system. Furthermore, this condition is due to a combination of various factors. Unfortunately, this part of the system appears to be malfunctioning due to some peculiar issues. Here are several established causes that can be investigated.

1. Bad alignment

The traction control warning light on the dashboard is often the result of improper wheel alignment. Nonetheless, the following alternatives should not be disregarded:

2. Defected sensor for measuring the angle of the steering

The column itself houses a sensor that can detect the angle at which the driver is guiding the vehicle’s front wheels. It does what its name says by gauging the angle, relative location, and rotation speed of the steering wheel.

The acquired information is then transmitted to the command unit. If there is a problem with the sensor, the resulting readings will be inaccurate, which could throw off the calculation. As a result, the warning indicator for the traction control system illuminates.

3. Wheel speed detector is not working

Sensing devices mounted on the wheels report the velocities of the wheels back to the brain. The information from the wheel speed sensor is also used by the traction control system, which makes calculated brake applications to prevent wheel locking. If any wheel speed sensor is providing inaccurate data, the traction control indicator will illuminate.

4. Rotating gear failure in steering system

The power steering system includes the steering rack, which is attached to your steering wheel. As a result of pressurized hydraulic fluid, steering is made quite easy. Steering becomes more difficult, especially on unpaved roads, when the steering wheel rack fails. That may cause the traction control indicator to illuminate.

When it comes to replacing tie rods, it’s important to know if you should start with the innermost ones or move outward.

5. Tires with low pressure

The ABS and traction control unit receive data from the wheel speed sensors. Tire pressure can affect how well it functions. Low tire pressure causes the wheel’s shape to deform, which might cause issues with the wheel’s speed sensor. This may cause the traction control indicator to light up.

Tire pressure monitoring systems (TPMS) are standard on most modern automobiles and will sound an alarm if your tires lose air.

6. Weather and road conditions

The traction control warning light will blink or stay on if you are driving in slippery conditions, such as mud or snow. In most cases, this is merely a sign that the traction control system is doing its job and adjusting to the current road conditions. If it keeps blinking, though, there is a problem that needs fixing.

7. Functionality for overriding automatic actions manually

The traction control system can be activated or deactivated by a switch located on the dashboard of most automobiles. When the light is turned off manually, it comes on when the switch is switched on. However, the word “OFF” is typically included in such a dashboard icon. It’s possible you accidentally turned it off in the past.

When getting a car detailed, it’s fairly uncommon for the owner to request adjustments be made or safety features disabled.

8. Disastrous systemic failure

Automobiles typically have highly integrated systems. Several different system failures might trigger the traction light, including problems with the electronic control unit (ECU), faulty programming, limp mode, and so on. Although this is a rare occurrence, the time and money required to determine and rectify the problem might be substantial.

When a car’s wheels aren’t properly aligned, what problems may you encounter?

Can bad alignment cause the traction control light to come on?

Wheel alignment is an important safety feature that you should always maintain as a driver. Tires last longer, gas mileage improves, and general performance is enhanced. It can also prevent the suspension and its parts from wearing out too soon.

However, maintaining correct wheel alignment throughout a vehicle’s service life is a difficult task. You should take care to steer clear of any obstacles, including road hazards like potholes and curbs. There are additional causes of wheel alignment issues, but these are the most common.

How can you determine if your wheels need to be realigned? The most prevalent indications of misalignment are:

  • Your car veers to one side.
  • Vibrations felt in the car when driving
  • The irregular and jarring motion
  • Wheel vibrations while driving
  • Damaged or worn tires
  • A crooked steering wheels
  • Tires that squeal when pressed on the gas

Wheel alignment should be checked often, but few motorists do so. If you check your wheel alignment once a year, you can save money on gas and extend the life of your tires.

The traction control warning light is on, is it safe to drive?

If the traction control indicator is the only warning light on the dashboard, it’s probably safe to drive. Take extra precautions when accelerating or turning when the weather is wet or slippery.

A vehicle’s behavior may be unpredictable in certain situations. To someone used to the sensation, sliding in an automobile can be terrifying.

Keep in mind that a tire that is rolling has more traction than one that is slipping. Avoid throwing off the vehicle’s equilibrium by being gentle with the accelerator, steering wheel, and brake pedals. Try to see as far ahead as possible in the path you intend to go. Keep a safe distance behind the vehicle in front of you at all times.

Watch Bad wheel alignment signs and symptoms-look out for these | Video

People also ask questions and answers related to Can bad alignment cause the traction control light to come

Can the traction warning light be due to poor alignment?

The ABS and Traction Control lights can come on if the car requires servicing or is trying to tell you something is wrong.

Can traction control be affected by misalignment?

While wheel alignment won’t have any direct effect on traction control, it will have a noticeable effect on handling and cornering. It is the job of a vehicle’s Traction Control system to prevent skidding and loss of control in wet or snowy driving conditions. 4

The indicator for my traction control system just lit up; what may have triggered this?

When a lack of traction is detected, such as in wet or snowy conditions, many traction control systems may turn on the warning light. The indicator illuminates when the system actively works to keep traction.

My car is trembling and the traction control light is on; why?

When the system is disabled, the traction warning light illuminates. Accordingly, a faulty wheel-speed sensor is typically the root cause of both traction control warnings and vehicle jerking.

How to turn off the traction control warning?

To accelerate, quickly depress the gas pedal three times. Then, start your vehicle and let it run for a full minute with the engine turned on. If there is no serious issue with your traction control system, the TCS and ABS lights should reset and disappear.


Can bad alignment cause the traction control light to come on?

Vehicle functionality is ensured through a network of interconnected systems and sensors. Any malfunction in any of these systems will trigger a cascade of other warnings to appear on your control panel.

Your traction control alert may have been triggered by something other than a misaligned wheel. When diagnosing automotive problems, though, it’s best to start with the most obvious locations to look at, such as the wheel alignment in this example.

Most of those problems can be avoided entirely with regular maintenance. Keeping that in mind, Taking care of your car will help it last longer and save you money.

So, I hope you got the full idea on Can Bad Alignment Cause the Traction Control Light to Come?

Please comment below about your ideas and share this “Can Bad Alignment Cause the Traction Control Light to Come?” article with your friends.

Stay tuned with our website to find out more exciting stuff. Don’t forget to check out our previous articles too.

Click Here to View the Visual Story Version Of this Article

Similar Posts